Exit demo DES-4122 Specialist - Implementation Engineer PowerEdge Version 2.0 PDF format · free preview

EMC DES-4122 - Questions & Answers

Free preview · every answer includes a full explanation

Product page: https://prepkeys.com/des-4122.html

Question 1
Single choice

A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016
They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on the virtual disk can be partitioned

How should the technician obtain access to the remaining 2 TB (approximately) of storage?

A.

Use the Lifecycle Controller OS Deployment Wizard to deploy the OS on this server

B.

Delete the 4 TB virtual disk and create a virtual (boot) disk no larger than 2048 GB

C.

Upgrade to a newer version of the operating system

D.

Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try again

Question 2
Single choice

Where is the data stored to allow Easy Restore to successfully complete a system board replacement?

A.

NAND Flash module on the disk drive mid plane

B.

IDSDM SD card

C.

vFlash SD card

D.

Serial Flash storage in the server's front panel

Question 3
Single choice

A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.

Which setting should the technician change in Processor Settings in the System BIOS?

A.

System Profile

B.

Virtualization Technology

C.

HyperThreading

D.

Number of Cores per Processor

Question 4
Single choice

What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

A.

Firmware: Upgrade to latest available version Configuration Apply always

B.

Firmware Allow version upgrade only
Configuration: Disabled

C.

Firmware: Match firmware of replaced part Configuration Apply always

D.

Firmware Disabled
Configuration Apply only if firmware match

Question 5
Single choice

What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge 14G servers?

A.

Ensures that the installed operating system is authentic

B.

Ensures that the server has a valid Service Tag number

C.

Ensures that no unauthorized BIOS or firmware codes are run

D.

Ensures that the server boots only when connected to a verified network

Question 6
Single choice

An engineer is checking a newly delivered Dell EMC PowerEdge R640 server that will be deployed for a new database environment

The inventory consists of:

The server power configuration will be set for gnd redundancy.
The management switch is 1000 Base-T and the top of rack switches 10Gb

What additional component(s) is needed for this configuration?

A.

Hot-plug power supply, 750 W - qty 1

B.

Hot-plug power supply, 1100W - qty 1

C.

Dell Networking, cable, 40GbE (QSFP+) to 4 x 10GbE SFP+ passive copper breakout cable, 3 meters - qty 2

D.

C20 to C21, PDU style, 250 V, 16 Amp, 3 5 meters power cord - qty 2

Question 7
Single choice

What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?

A.

SupportAssist Enterprise

B.

iSM

C.

OpenManage Essentials

D.

iDRAC9

Question 8
Single choice

After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.

Which setting should be changed?

A.

Rebuild Rate in the BIOS settings

B.

System Profile to Performance in the BIOS settings

C.

System Profile to Performance in the iDRAC GUI

D.

Rebuild Rate in the iDRAC GUI

Question 9
Single choice

An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server

Which BIOS settings need to be used for installing the Windows server?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question 10
Single choice

A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.

What action should a technician take to help accomplish this goal?

A.

Configure servers to access the remote firmware repository

B.

Enable the Match Firmware of Replaced Part setting in the system BIOS

C.

Install and configure a repository manager

D.

Enable the Collect System Inventory On Restart (CSIOR) attribute

Showing 10 of 56 questions · Unlock the full set