Exit demo HPE2-Z40 Delta - Applying Aruba Switching Fundamentals for Mobility PDF format · free preview

HP HPE2-Z40 - Questions & Answers

Free preview · every answer includes a full explanation

Product page: https://prepkeys.com/hpe2-z40.html

Question 1
Single choice

What is one requirement to combine Aruba 5400R z|2 Series switches in a Virtual Switching Framework (VSF) fabric?

A.

Both ofthe members must have two management modules.

B.

The switches must operate in v3-module only mode; any modules of an earlier version are
automatically disabled.

C.

The interfaces assigned to the VSF link must be pre-configured as part of a link aggregation.

D.

One of the switches must be an Aruba 5412R switch, while the other member can be any switch in the
5400R series.

Question 2
Single choice

A network administrator wants to apply a critical PoE priority to any ArubaOS switch port that connects to an Aruba AP. The priority should be applied dynamically based on LLDP messages received from the AP.

Which step should the administrator take to meet this goal?

A.

Configure the PoE usage setting on all ports as //dp.

B.

Configure the PoE usage setting on all ports as class and make sure that Aruba APs are defined as Class 4 devices.

C.

Enable the default AP profile bound to the Aruba AP device type.

D.

Enable LLDP IVIED TLV extensions on the switch port.

Question 3
Single choice

Which solution provides firmware update automation for Aruba APs and switches?

A.

Aruba CIearPass

B.

Aruba Virtual Switching Framework (VSF)

C.

Aruba Activate

D.

Aruba AirWave

Question 4
Single choice

Refer to the exhibit.

The exhibit shows settings for a WLAN on an Aruba Instant cluster To which VLAN is wireless user traffic assigned?

A.

to the untagged VLAN on switch ports connected to the Instant APs

B.

to the VLAN defined for wireless users in Aruba AirWave

C.

to the default VLAN defined in the System settings in the Instant

D.

to the default VLAN on switches connected to the Instant APs

Question 5
Single choice

Which settings are required on ArubaOS switches for Aruba AirWave to discover monitor, and manage them?

A.

shared cluster key and an SNMP v2 community or v3 user

B.

SNMP v2 community or v3 user and an HTTPS certificate

C.

credentials for Telnet or SSH login and an SNMP v2 community or v3 user

D.

credentials for Telnet or SSH login and an HTTPS certificate

Question 6
Single choice

A network administrator connects several newAruba.
Instant APs (at factory defaults) to a switch. After waiting several minutes for the cluster to form, the administrator is ready to provision the cluster. The VLAN on the ports connected to the APs has no DHCP services.

How can the administrator contact the Instant UI and provision the APs with static IP addresses?

A.

Connect to the Instant SSID and open a Web browser.

B.

Access the default IP address, 192.168.1.1, from a device connected in the AP VLAN .

C.

Access the cluster using Aruba Activate.

D.

Access https://vc.arubanetworks.com from a device connected in the AP VLAN.

Question 7
Single choice

A network administrator needs to reach an ArubaOS switch CU at a management IP address The administrator also needs to ensure that the switch entirely rejects Telnet and SSH connections from users in data VLANs.

How can the administrator meet these goals?

A.

Configure the management IP address on the default VLAN and set a manager password.

B.

Configure the management IP address on a VTY interface and bind an ACL to this interface.

C.

Configure the management IP address on any VLAN except the default VLAN. Set a manager and operator password .

D.

Configure the management IP address on the OOBM port and configure the switch to listen for Telnet and SSH only on this port.

Question 8
Single choice

Which devices must support Multi-User Multiple Input Multiple Output (ML) MIMO) in order for an AP to transmit to multiple clients simultaneously?

A.

all of the APs in a WLAN, but none of the clients

B.

the transmitting AP and at least one of the clients that receives simultaneous transmissions

C.

the transmitting AP and all of the clients

D.

the transmitting AP and all of the clients that receive simultaneous transmissions

Question 9
Single choice

Refer to the exhibit.

The exhibit shows the physical connection between two Aruba 5400R switches and a server The network administrator is concerned about redundancy and wants to implement a solution like that shown on the right side of the exhibit. The administrator plans to use an LACP link aggregation with both links active.

What must the administrator do first?

A.

Configure an LACP link aggregation between the switches.

B.

Enable dynamic link aggregation globally on the switches.

C.

Combine the switches into a Virtual Switching Framework (VSF) fabric.

D.

Configure the same operational key on both the switches.

Question 10
Single choice

What do all devices in the same AirWave folder have in common?

A.

They share firmware auditing settings.

B.

They are viewed together in the APs/Devices page

C.

They share a configuration template.

D.

They have the same monitoring settings, such as polling settings.

Showing 10 of 34 questions · Unlock the full set